CGS4 manual
   
Up:UKIRT
Instruments | Next: IRCAM3
The CGS4 manual documents sensitivities and resolutions and general
information necessary to take data using CGS4. You can move back to this
table of contents using the CGS4 icon at the top and bottom of each section.
Before using CGS4 you should have read the "Introduction
to CGS4" and the documents in the online manual below and
become familiar with the contents of the documents discussing recommended
exposure times, configs, execs and general observing procedures.
Check the "Current
Status" document to find out which gratings are currently available
in CGS4, news and planned changes. Please note that the configuration for
semester 00B and the plan for semester 01A are available on this page.
Latest News:
With the delivery of MICHELLE
anticipated in the near future, Tom Kerr will be
handing over responsibility for CGS4 to Paul Hirst.
In preparation for this, Paul should now be considered the first point of contact for
enquiries about CGS4 and observing with this instrument. Tom is still happy to answer questions
about CGS4, but MICHELLE preparatory work may preclude a timely response. When MICHELLE
arrives at UKIRT, Paul will take over full responsibility for CGS4.
The CGS4 Online Handbook.
Contents:
1) Introduction
2) How to prepare for your CGS4 run
3) Operating CGS4
4) General observing information
5) Miscellaneous
6) Data reduction
Up:UKIRT
Instruments | Next: IRCAM3
   
Last Modification Date 2000/10/06 - Last Modification Author: Tom Kerr
Tom Kerr (tkerr)
|